It's been ages since I tried sending RTTY from my K3 using paddles; I've been using a SignaLink USB for RTTY for the past couple years! Anyway, I set up the K3 for FSK D, plugged the paddle into the paddle socket on the back of the K3, and no RTTY! So I checked cabling, etc., and still no RTTY using paddles. I switched over to CW mode and CW worked just fine! Back to FSK D and no RTTY. I have my call in an M1 macro, so I pushed M1 and got RTTY (text decoded properly!). Then I tried the paddles again -- nothing! So I pressed M1 and after my call was sent and the FSK was "diddling", my paddles worked! When the diddling stopped, the paddles no longer produced RTTY. What am I missing here? Bert, N4CW ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
