I am installing a new SignaLink USB device and have it all working fine except for low output from the K3. I can only get about 10 watts out even with the Windows volume controls set as the factory suggests, and with fldigi output set to maximum. The K3 line in gain is also set to max.
I know there is a jumper in the SignaLink USB to increase drive but before I do that I'm wondering if what I'm seeing is normal. The SignaLink USB manual says the default drive setting is OK for most radios, so I'm wondering if the K3 is an exception or if I should keep fiddling with the configuration. All comments welcome. 73, Bill W6WRT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
