Very nice summary, Fred. I have your books but
sometimes finding this sort of info takes lots of
digging. This file fills that need or so it
appears (printing it now).
Thanks!
73, Phil W7OX
On 12/18/14 11:44 AM, Cady, Fred wrote:
There is a 'K-Line Introduction and Set Up Guide" on www.ke7x.com that should
help understand all this.
Cheers and 73,
Fred
KE7X
-----Original Message-----
From: Elecraft [mailto:[email protected]] On Behalf Of Dick
Dievendorff
Sent: Thursday, December 18, 2014 11:37 AM
To: 'James Bennett'; 'Elecraft Reflector Reflector'
Subject: Re: [Elecraft] K3/KAT500 Synchronization
This was introduced in K3 firmware revision 4.83.
Dick
-----Original Message-----
From: Elecraft [mailto:[email protected]] On Behalf Of James
Bennett
Sent: Thursday, December 18, 2014 10:17 AM
To: Elecraft Reflector Reflector
Subject: [Elecraft] K3/KAT500 Synchronization
Forgive me if this has been discussed (and answered) before but I do not find
it in the archives. A while back there was a firmware update that would allow
the KAT500 to “automatically” select the memorized L/C values as the K3 was
tuned across a band. I have the current firmware in both units, but do not see
(hear) the KAT500 doing anything as I tune across the band. For example, I just
set the K3 at 14.006 and tapped the key paddle. The tuner clicked once and lit
up the LED at the 1.2 mark. I then turned the K3’s VFO knob up to 14.080 - not
a sound to be heard while tuning. When I got to that frequency, I tapped the
key again and heard a short relay click noise and again got the 1.2 LED.
So, my K3 and KAT500 are not doing what I thought the changed firmware was
supposed to do. Is this something I need to set in a menu parameter in one or
both units? Or, is this still a change residing in a beta version of the
firmware?
Thanks, Jim / W6JHB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
