Interesting presentation and I certainly understand the principal of
supply voltage vs IMD. There are some transmitters that I would not run
at 12v some are worse than others. Im looking specifically at K3
performance as this is what I have, and as Don points out it is one of
if not the cleanest out there and as pointed out droping my power by 30%
would have little effect at the receiving end but would certainly reduce
IMD and may get me an hour more operating time to boot. What
transmitter you were using on page 43 Seems to be an ICOM 7600 for
most samples and what were the actual high, nominal, and low voltages.
just a guess would be the rigs spec High, 13.8, and spec minimum.
Also I wonder if I could get the authors permission to use this in a
presentation at a club meeting.
David Moes
[email protected]
VE3DVY, VE3SD
On 12/23/2014 02:24, Jim Brown wrote:
On Mon,12/22/2014 2:50 PM, david Moes wrote:
I'm just curios is there any real test data available showing what
IMD may be present at various supply voltages?
The link below is for a presentation that K6XX and I did to NCCC a
year or so ago. See slide #42 for some measurements that Bob did.
http://k9yc.com/K6XXAmpTalk.pdf
The measurements I posted a day or two ago were done at supply
voltages between about 12.5V and 12.9V. It's hard to find the IMD --
there's some, but it's WAY down.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
