The mod kit has a label for the higher current capacity that is used to cover the original one on the K3. I'm guessing new K3s are labeled correctly with the higher available current.
Bill AF4B -----Original Message----- From: "Don Wilhelm" <[email protected]> Sent: 12/22/2014 2:17 PM To: "Dauer, Edward" <[email protected]>; "[email protected]" <[email protected]> Subject: Re: [Elecraft] K3 DC Output Ted, Yes, K3s manufactured after the mod came out do have the 1 amp output rating starting with SN 6588. The Owner's Manual itself has not been updated, but Errata Rev D10-5 dated June 9, 2014 states the places where the manual should be manually updated. 73, Don W3FPR On 12/22/2014 11:55 AM, Dauer, Edward wrote: > According to the Manual the K3¹s DC output socket is limited to 0.5 amps, > which I understand means it can power a P3 alone but not both a P3 and a > PR6-10, nor a P3 with the VGA accessory. I looked through the on-line > manual for the mod kit this morning - it looks like major surgery. Did > Elecraft incorporate the mod in K3¹s shipped after the mod came out in > 2012? My K3 is S/N 7562. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
