Hi Joe, If you purchased the KPAK3AUX cable set with your KPA500 you should have a 15-pin Y-cable adapter. If not you can get one from Elecraft or another vendor. Be sure to NOT use a VGA y-cable. Simply put the y-cable on the back of the K3 and plug the control cable for the PR6 into one leg and the KPA into the other.
Cheers and 73, Fred KE7X Author of: "The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 - Going for the summit" "The Elecraft KPA500 and KAT500 - the K-Line Dream Station" Printed, coil bound copies of these are all available at www.elecraft.com KPA500 and KAT500 Quick Set Up Guide http://www.ke7x.com/home/k-line-introduction-and-set-up-guide KAT500 and KXPA500 Tuner Operation http://www.ke7x.com/home/kat500-and-kxpa100-tuners KE7X -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Joseph Carter Sent: Friday, December 26, 2014 6:35 PM To: Elecraft Subject: [Elecraft] PR6 Preamp - "control connection" My wonderful XYL gave me the PR6 for Christmas - trying to figure out how to connect the "control wire" as I have the cable to the KAT500 / KPA500 already in the ACC socket - the instructions say if the ACC is in use to just connect the control wire to pin 11. Anyone have an easy way to do this? I have the Elecraft cables which are all molded so no access to the back of the connectors. I can't seem to find a "VGA" breakout box. Thanks es 73. de Joe, w9jc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
