On Thu,1/1/2015 9:17 AM, David Ahrendts wrote:
I’m sure it is possible.
Yes. The K3 and KX3 work very well with virtually any decent mic. All that is needed is a properly wired connector adapter. Just pull out the documentation for the mic and the K3, see what pins are connected to the mic on each end, dig out the connectors, pull out your soldering iron, and make the adapter. I buy ham mic connectors at ham flea markets and keep a few in the junk box. I buy audio connectors from Full Compass (near Madison, WI).
If I had to adapt from an RJ45, I would buy a pre-made cable with the RJ45 connector, cut off the other end, and install the mic connector for the radio.
73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
