Hi, Both Tx and Rx equalizer settings are automatically reset when selecting digital modes.
Per-Tore DL/LA7NO On 5 January 2015 at 22:00, Gary Mohrlant <[email protected]> wrote: > I like to using the RX audio Equalization on my K3. > > I use the K3 for some of the digital modes and when I do I need to have a > flat audio response. > > Is there a way to turn off the equalization when I don't want it and then > turn it on when not running digital modes. > > I know I can reset it to flat in the menu by pressing CLR but then I have > to go thru the set up again. > > Setup: I'm using the line output. > > I'm not a programer so I don't know if this could be done with a Macro or > if this is something that Elecraft could provide in a software update. > > > Gary W0GHZ > EN34 in MN > [email protected] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
