HI David, so my numbers:
for 144.300MHz 0,1mW -> 2W out 1mW -> 9W for 146.100MHz (as I have I/F for 10GHz from 146MHz up) 0,1mW -> 1,3W 1mW -> 7W hope You did power calibration via K3 Utility whwre is also 1mW output calibration (I did ;-)) All the best and GL, 73! Lexa, OK1DST K3/100 #727 ---------- Původní zpráva ---------- Od: David Pratt <[email protected]> Komu: Viggo Magnus Nilsen <[email protected]> Datum: 7. 1. 2015 10:10:58 Předmět: Re: [Elecraft] K3 , Elecraft Transverter K144XV-K "I have just measured my K144XV power output with an accurate power output meter and find that with the K3 set for 1mW the output is 10.5W. But setting the K3 to 0.1mW (fully counter-clockwise) the output goes down to only about 7W. No matter what I do, I am unable to reduce the power further. It will be interesting to see if other K144XV users find the same. 73 de David G4DMP On 7 Jan 2015 04:20, Viggo Magnus Nilsen <[email protected]> wrote: > > Hello K3 owners ! > > Want to know the lowest power setting Elecraft internal 2 meter transv.( K 144XV-K)??, know the max out is 8 to 10 watt approx....... > > My DB6NT transverters ( IF 144 MHz) need 0,5 to 5 watt ,(IF power settings are adjustable in the DB6NT Transverter) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]" ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
