"Other than they both fit into the same space and
for that reason cannot be both present at the same
time": Always these troublesome minor details, Don
:-)
I suspect that if a 6-band K1 (say, with external
ATU like the T1) had been doable, Wayne would have
done it!
73, Phil W7OX
On 1/12/15 10:29 AM, Don Wilhelm wrote:
Dale,
Other than they both fit into the same space and
for that reason cannot be both present at the
same time - there is no problem.
The offsets are remembered for all 6 bands.
So if you replace the 4 band board with the 2
band board, all you need to do is set the menu
b1 parameter to 3.5 and the b2 parameter to 21.0
and you will be ready to operate.
73,
Don W3FPR
On 1/12/2015 1:06 PM, Dale Putnam wrote:
Is there any reason why, a 2 band module for
the K1, couldn't be made for 80/15?
And installed with a 4 band (40-30-20-17)?
Thank you!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
