See below 73 de Bruce, N7TY White Plains, MD
-----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Arie Kleingeld PA3A Sent: Monday, January 26, 2015 09:06 To: [email protected] Subject: Re: [Elecraft] Reverse Split??? Bruce, There are a few top-of-mind options: - the connected antennas to the two RX's (AUX and MAIN) ONLY HAVE ONE ANT, CONNECTED TO ANT 1 JACK. - the use of the RX ant port NOTHING CONNECTED TO THIS PORT - RF and AF settings of both RX's BOTH MAXED OUT TO THE LEFT 73 Arie PA3A I checked and double checked the settings for both RX to ensure I didn't have something turned on the Main that was causing me not to be able to hear him. Both Main and Sub were set up the same. I could hear him on the Sub, but not the Main, weird. Also, playing in the 160 m contest, I noticed that the Main RX is hearing signals the Sub is not. Even when I have both on the same Freq there is a noticeable difference in what the Main and Sub are hearing. Ideas? 73 de Bruce, N7TY White Plains, MD ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
