Mark,
TX EQ is a Main Menu setting. Tap the MENU button then rotate the VFO B
knob until you see TX EQ1 If it is set to some other band, tap "1").
Rotate the VFO A knob to change the setting for band 1.
Then tap 2 to change band 2
So on for bands 3-8.
73,
Don W3FPR
On 1/27/2015 8:25 AM, [email protected] wrote:
Good Morning,
I am looking to setup my Heil HM12 microsoft using the TX EQ. I have looked at
the manual on pages 35 and 36 and it doesn't seem to be too clear as to what
buttons to push to get to the TX EQ setup. I have read the different messages
but it seems it deals with a utility program that one can use for the K3.
How do I set this up the old fashioned way as they say? It see a RIT and XIT
button on the far right bottom side of the transceiver but that's about it. Any
help would be much appreciated. Mark Griffin, KB3Z
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
