Here is a good document that I found online that I used for reference
when I was setting up that will help it describes using N1MM and the
K3 and has a good section on using MMTTY and AFSK
http://www.n3me.net follow the howto link and select
N1MM software - control radio and log contests via computer and
Elecraft K3
if you are willing to build the interface you can also use FSK I
plan to have this built soon. but I am using AFSK just fine for now
FSK just makes things a little easier as you do not have to worry
about audio levels etc.
http://n6mw.jimdo.com/k3-project/
I would however suggest that if you are using AFSK that you consider
a good external sound card like the Tascam card often discussed on
this list as the internal soundcard in most laptop including dell
tendto be noisy
I hope you have luck with it and if so perhaps we will meet in the
CQ WPX RTTY.
David Moes
VE3DVY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
