Jim has helped me in a number of ways, both RXEQ and getting good TX audio from my K3.

I'm pretty much deaf above 1200 Hz, lots of sudden, very loud noises in my bulletproof and immortal period 50 years ago. Jim's RXEQ suggestion gave me about 30 dB of higher frequency boost ... turn down the lows, raise the highs, and turn up the AF Gain. I generally run mine around 12 o'clock, much above that and distortion gets really bad. I don't know if that's in my headset [Heil ProSet from Elecraft], or clipping in the audio amp. 30 dB is only about a third of my hearing loss above 1200 Hz, but it does still make a BIG difference.

I found my "sweet spot" for pitch just by experimentation with the pitch control. On sideband ... which you won't find me on much, very hard copy ... at DSP BW around 2.1 or a little less, I shift it down. For RTTY, I use the 915 Hz setting in the K3 and MMTTY.

Many years ago, while a high school senior with a part-time relief op job at a coastal marine station, the OT's taught me that when the noise on the Holy Frequency was really bad, lay the cans on the desk. Somehow, this lowers the noise and not the signal. The VA has given me some very good hearing aids, they don'w work under the headphones, but using them with the headphones on the desk does often improve the SNR of very weak signals.

Good luck,

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015
- www.cqp.org

On 2/5/2015 5:36 PM, Jim Brown wrote:
On Thu,2/5/2015 4:45 PM, Don Wilhelm wrote:
Your real answer depends on your particular hearing loss, so no one
else can say what your particular "desired pitch" can be.

Yes. There are several types of hearing loss. That which comes with old
age is a loss of high frequencies; what you appear to have is likely the
result of excessive noise exposure, and can be anything from a big
"hole" in the middle of frequency response to massive loss of highs to
ringing.

If your loss is mostly highs, it can be PARTIALLY compensated using
RXEQ. Simply turn down the lower bands and turn up the higher ones. If
it's the ringing that drives you nuts, try setting the CW RX pitch
lower. Play with it and see what works for you. You can also do these
things in combination.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to