Pretty sure of the dummy. Verified with the Analyzer flat as can be. Antenna actually reads only 1.3-1 at the tested 10m freq with the Analyzer. KX3 says 1.8-1 no matter what. I am normally hooked into an HR50 and the KX3 ATU is bypassed for this and should be. KX3 will tune down the 1.3-1 antenna direct as it should to 1.1-1. (no amp) I don't think the KX3 is actually seeing an 1.8-1, but is confused in itself. 160 thru 20 meters are all 1.1-1. I am going to do a re-update with the firmware and see what happens. Did finally get this Reflector thing figured out Phil. Now works pretty good. Happy here. 73, Bill, WD8JWJ
-- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-SWR-tp7598124p7598138.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
