Lynn,
You really should use 13.8 volts or higher if you can. It will result
in a cleaner signal (lower IMD).
If you are using a supply with less than that voltage, it is wise to
back down on the power a bit.
73,
Don W3FPR
On 2/10/2015 3:57 PM, Lynn W. Taylor, WB6UUT wrote:
I just looked at four bricks floating around my office, and two of
them are 12v. The other two are 18v and 19v.
The smallest one I have is 2a, which would probably charge the
internal KX3 batteries. The bigger one might be okay for transmitting.
That's why I specified "12v brick" in my post. There are many
different bricks out there.
73 -- Lynn
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
