I fired my K3 up in preparation for CQWW RRTY this weekend. I run MixW.
When I checked the CAT operation, it wouldn't work properly ie gave me
some monsensical frequency readings in MixW's log. I thought it may have
been a new motherboard in my PC, but checked the operation with my K2
and it worked fine. The settings of the K3 are:
RS232 38499 b
KIO3 nor
MixW's settings are 38400 8 N 1, unchanged from the last time I used the
rig.
COM 1 on the PC motherboard is set to 38400 8 N 1.
I tried a PCie dual serial port card in the PC motherboard - same problem.
I turned the baud rate down to 19200 in the K3, MixW and on the PC
motherboard and all now seems to work as it should. I can live with
that. But the question remains: is the KIO3 board becoming faulty?
73
Bob Towers MM0RKT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
