I am probably doing something wrong, but I cannot find any reference to the following issue in the K3 manual.
It seems that if one tunes to a non-ham band (general coverage) frequency (I used numerical direct frequency entry), the ham band closest to the target frequency now assumes the targeted general coverage frequency. For example, I was on 40m and wanted to check a local broadcast AM station at 1100 KHz. I entered "1.100" via the "FREQ ENT" button, and the radio tuned to 1100 KHz as expected. However, now when I cycle through the ham bands, the 160 meter slot is set to 1.100 Mhz instead of 1.8XX MHz. Is this the way it is supposed to work? It's a bit of a deterrent to use the KBPF3 to explore general coverage frequencies if a ham band gets hijacked as a result. 73, Dale WA8SRA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
