Wayne,
Please do not take out LINK. I'm using it a lot in contests and in
DXpedition work
Just to give you and others the idea:
With both main and sub RX's on the same freq, mode and BW I link them
with LINK.
But here comes the fun part. When working with the N1MM logger I use
F9-F12 to quickly command the audio from the K3 main and sub:
- F9 = listen A-B
- F10 = listen A-A
- F11 = listen B-B
- F12 contains the commands to copy VFO freq and mode from A to B and
LINK the VFO's.
This unique flexibility of the K3 is impossible in the DIVERSITY mode.
so P L E A S E , keep LINK in there.
73
Arie PA3A
Wayne Burdick schreef op 15-2-2015 om 5:04:
Mike (et al),
It's beta, experimental, subject to further revision. We took the original
dual-PB out based on earlier feedback suggesting no one was using it (same with
LINK). APF, in contrast, has been hugely popular. But with this input, we'll
reconsider.
Thanks,
Wayne
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
