Tom,
Open the top cover and check the interlock actuator. If that was loose
it may have become dislodged when you moved the amp. See the KPA500
assembly manual page 42.
"Look for the easy things first."
73,
Don W3FPR
On 2/17/2015 8:11 AM, Amateur Radio Operator N5GE wrote:
This is a 240V Amp.
When pushing the on button on my KPA500 the power will not come on.
It worked very well until I moved it to another place on the OP Table.
and connected it to K3 #1055 after having #1055 brought up to the
latest version at Elecraft.
I have checked the fuses and verified that the power cord is supplying
the proper voltage to the amp internally and externally .
What is the most likely cause of failure to get power to the amp?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
