Make sure that you are not generating PTT by software command in fldigi and PTT via the VOX in Signalink at the same time. The "stuck in transmit" behavior seems to be associated with mixing software and hardware PTT.
73, ... Joe, W4TV On 2015-02-20 3:04 PM, Jose Campione wrote:
A problem similar to the one detected by Dan Sherwood with the K3 some months ago (see his posting of Jul 13, 2014) is now resurfacing with the KX3: When operating a digital mode, with the rig in USB or Data, when the transmission ceases (i.e. the KX3 no longer transmits any signal) the TX light on the rig remains on and the unit remains in idle. I then have to manually touch on XMIT to return the rig to receive. I am using Flrig v. 3.22.5, the computer is a MacBook Pro Retina running OSX Yosemite 10.10.2. the KX3 is updated to the last firmware version and the Signalik USB uses the SLMODKX3 module and proper cables and connections. I have tried differents settings for the JP2, JP3 and JP4 jumpers in the Signalink USB but to no avail. The settings of the MIC BIAS and MIC BTN in the KX3 menu also do not improve on this. Any suggestion is more than welcome. 73 Jose VA3PCJ [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
