Hi Don, macros are a great feature. As you are building them you can test them with the Elecraft utility and when you are happy you upload them to the radio you can set up a macro for anything you can define as a series of commands. take a look at the K3 programming reference guide to see what commands are available for use (basically everything including accessing menus ) Once macros are uploaded to the radio you can assign them to
M1-M4 tap and M1-M4 Hold as well as PF1 and PF2 My Spit +2 looks like (assigned M2-tap) DV0;SWT13;SW13;FT1;UPB5;XT0;SB1;MN111;MP001;MN255;BW$0100; Broken down this is DV0; (diversity off) SWT13;SW13; (two taps of A>B) to copy all settings FT1; Split on UPB5; up 2 Khz (UPB4; up 1KHz UPB6; up 3Khz, UPB7; 5Khz ) XT0; (XIT off ) SB1; (Sub RX on) MN111;MP001;MN255; (L-mix-R) to A Ab (main in both ears, sub in right) BW$0100; (Set VFOB filter to 1Khz to make hearing the callers easier) I also have a clean-up macro that puts things back to a normal, consistent state (assigned M2-Hold) FT0;RT0;DV0;SB1;MN111;MP000;MN255;SB0; Broken down this is FT0; Split off RT0; RIT off DV0; Diversity off SB1; SUB on (needs to be on for next command to be valid) MN111;MP000;MN255; (set L-mix-R to A B ) SB0; SUB off again hope this helps On Sat, 2015-02-21 at 14:30 -0500, [email protected] wrote: > Ok more reading and searching the internet has got me started. I see > you need to use the elecraft utility to make a macro and assign it to a > memory button. I was trying to figure out how to do it using the radio > front panel. > > > ~73 > Don > KD8NNU > FH#4107 > -.- -.. ---.. –. –. ..- > > > On Sat, Feb 21, 2015 at 1:17 PM, [email protected] wrote: > > > All the talk about split has made me want to build a quick split macro > > or memory button. > > > > I started to read the manual but its not making sense to me. I guess > > some stuff I just need some help to learn. > > > > Anyway what I think I want is to set up a macro button that would do > > the A>B double tap function then add 5k to VFOB (up 5) and then put > > the radio in split. Also a similar one for adding 1k to VFOB (up 1 > > for CW). > > > > How would I do this and assign to M1 or M2. > > > > I know this should be simple but what I am reading is not sinking in. > > > > Thanks in advance for someone who can explain into my thick skull. > > > > ~73 > > Don > > KD8NNU > > FH#4107 > > -.- -.. ---.. –. –. ..- > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] -- 73 Brendan EI6IZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
