Sorry to be negative, everyone. I need to take my own advice and be helpful.
I recommend starting with the rigcontrol package, written in Python. It is OK
if you don’t know Python. This code is very straightforward, so you don’t need
use any fancy Python features.
It comes with a number of command line scripts that use the package. For
example, here is main part of the “qrg” script, which reports the current
frequency.
if len(sys.argv) == 1:
rig = riglib.K3()
print(rig.qsyq())
rig.close()
else:
print "usage: qrg"
I have some some unfinished additions to the library to add KX3 support and
build an SWR sweeper (poor man’s antenna analyzer). It works most of the time,
but the SWR can only be read off the display, so it occasionally reports
“bypass” as the SWR, because the ATU needs to be in bypass mode to measure the
SWR.
I sure wish there were commands to read the SWR directly from the KX3.
rigcontrol is here:
https://pypi.python.org/pypi/rigcontrol
You will also need the K3 programming reference. When I was working on the
code, I had the reference open in Adobe Reader all the time, because I kept
searching it for details. On top of that, I printed out key pages.
http://www.elecraft.com/manual/K3&KX3%20Pgmrs%20Ref,%20E11.pdf
Since my code doesn’t entirely work, I’m not sure how much help I can be, but
I’ll give it a shot.
wunder
K6WRU
CM87wj
http://observer.wunderwood.org/
On Feb 21, 2015, at 11:23 PM, Walter Underwood <[email protected]> wrote:
> I am pretty sure that the question about ASCII programming was about the
> ASCII protocol to Elecraft rigs. That truly is ASCII, complete with control
> characters.
>
> And yes, I know about Unicode and UTF-8. I was doing multibyte character set
> programming before Unicode.
>
> I’ve done some Elecraft control programming and it isn’t easy. Yeah, you can
> fart out ASCII, but the radio takes time to respond, and some of the codes
> read the display rather than the data, so it is a highly stateful, ugly
> experience.
>
> Instead of explaining how smart you are about UTF-8, be an Elmer.
>
> wunder
> K6WRU
> CM87wj
> http://observer.wunderwood.org/
>
> On Feb 21, 2015, at 9:44 PM, Phil Hystad <[email protected]> wrote:
>
>> ASCII...
>>
>> Well, the UTF-8 character set is indeed designed to be backward compatible
>> with ASCII but it is far more than that -- and even these days many
>> programmers do have trouble with UTF-8. Why? Because UTF-8 is a
>> multi-byte, variable length character encoding system. Sure, the backward
>> compatible ASCII codes are single byte but you can literally encode any
>> character defined by UNICODE via UTF-8. Chinese characters defined in
>> UNICODE take more than a single byte to define so they require the
>> multi-byte features of UTF.8.
>>
>> Now, I do agree that the programming for radio control is not likely to run
>> into multi-byte characters but UTF-8 will include them if they are found
>> elsewhere -- say a text file that has mixed English as other multi-byte
>> characters.
>>
>> I agree with the need to download Xcode and learn Objective-C but the new
>> Swift language might be easier for someone who is just starting out to
>> learn. I am not sure which would be easier to learn, Objective-C or Swift
>> but I think Swift, being more modern and also supporting scripting is easier.
>>
>> 73, phil, K7PEH
>>
>>> On Feb 21, 2015, at 9:30 PM, Jack Brindle <[email protected]> wrote:
>>>
>>> ASCII? That is a character set that is a subset of Unicode, which is now
>>> used on all modern computers. It isn’t something you program with, it
>>> simply represents characters. On the Mac we do not use ASCII coded
>>> characters, but rather Unicode characters, usually coded in UTF-8.
>>>
>>> What is it that you are really trying to do? If that is to program the Mac,
>>> I highly recommend a tutorial on Objective-C and Cocoa, along with Aaron
>>> Hillegas’ excellent Mac programming tutorial “Cocoa Programming for Mac OS
>>> X” which is now in its fourth edition. I see that Aaron also has a book on
>>> Objective-C programming, which might be a good place to start. Both are
>>> produced by Big Nerd Ranch over in Atlanta, and are available from Barnes
>>> and Noble, amazon and other booksellers. Yu might also want to take a good
>>> look at programming the Mac in Swift. There are several good books
>>> available at the iBooks store, some free, others cost a bit. You might find
>>> Swift a bit easier than Cocoa to learn and get up to speed.
>>>
>>> You can get the Mac tools directly from Apple for free at
>>> http://developer.apple.com. In particular, the Xcode development
>>> environment is what you want. It allows development in many languages for
>>> the Mac and iOS devices. For UI development, you will need to use either
>>> Objective-C or Swift
>>>
>>> Good luck on you new journey. Programming the Mac is a fun and very
>>> enjoyable exercise, with lots to learn no matter how good you become at it.
>>>
>>> 73,
>>>
>>> Jack B, W6FB
>>>
>>>
>>>> On Feb 21, 2015, at 6:12 PM, Dauer, Edward <[email protected]> wrote:
>>>>
>>>> Sometime soon I mean to program my K3's Pig Knob to do what I'd like,
>>>> rather than the factory defaults. If someone who is adept with using
>>>> ASCII on the K3 is willing to help, I would appreciate meeting you
>>>> off-list.
>>>>
>>>> Requirements - the patience to put up with someone (me) who knows niente
>>>> about computer programming, ASCII, computer rig control, and any other
>>>> topic that might be germane. Time frame would be any time in March that
>>>> suits both our calendars; probably by e-mail. In case it matters, I use
>>>> Mac OS X (10.10).
>>>>
>>>> Thanks in advance to whomever cares to take this project on . . . .
>>>>
>>>> Ted, KN1CBR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
