Hi This is probably finger trouble, but I cannot see what the problem is, so I wonder if anyone knows what is going on.
I have a K3, Sigalink and HRD/DM780. For voice and CW including using the winkeyer all works fine including CAT. However I get a transmit lockup in data mode. I am using vox from the Sigalink to control the K3 PTT. I have K3 power turned to zero. I set the K3 in data mode and send some data and all is well relays go over tries to send some data goes back to receive. If I plug in the RS232 cable and send some data all works well, the Sigalink drops PTT, buy the K3 locks in transmit and will not come out of transmit until I power cycle the K3. Removing the RS232 cable has no effect unless I power cycle the K3. Removing the RS232 cable and all works exactly as expected. I have configured ptt to off-off. Does anyone have any idea what I am doing wrong here? Many thanks Stewart/G3YSX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
