Jim,
Seeing that you have not received any other responses --
I am talking out of my realm because I know nothing about the RemoteRig
setup, but if RemoteRig is using RTS-CTS protocol, then you will need to
loop-back (short) the CTS to RTS path. The KX3 does not include RTS nor
CTS in the connection to the serial port. I don't know about the
RemoteRig serial communications, but I do know something about RS-232.
73,
Don W3FPR
On 2/27/2015 4:51 PM, Jim Cullum via Elecraft wrote:
So I have seen (what I think) is every post about (possibly) using the KX3 as a
Remoterig controller for the K3. I am trying to set this up, but currently
with limited success. I need someone who has success with this and can pass
along some suggestions for success. I can only find a 2012 posting from SM0JZT
where he got it to work:
https://groups.yahoo.com/neo/groups/KX3/conversations/topics/14433
Currently with the KX3 as the controller I can only power the remote K3 on/off,
none of the other limited set of features (outlined by N6KR such as VFO, mode,
filter, etc) are working.
Setup:
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
