Hello, George Cutsogeorge W2VJN wrote a book "Managing Interstation Interference". I have the 2nd edition and I believe there is a typo. The author states he used his Elecraft K3 for his work; I had emailed the author quite awhile ago about this matter but got no response.
On pg 6 in para 1.3.2, W2VJN says at "... signal offset 20 kHz", he gets +5 dBm. However, on pg 8 in Fig 1, he wrote 2 kHz at the +5 dBm level, . I've read the K3 specs and t he way I interpret them, the typo is on pg 8 and should read 20 kHz. I'd like someone to verify I'm not going off in a wrong direction here. I'm giving a class on "dB uses" this month to our club and Figure 1 is in my presentation, so it needs to be correct. BTW, the specs for the K3, as applies to dB, are featured in my presentation. TIA for any replies. . 73 Jerry KM3K ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
