Hi Wayne, Thanks for the 'CW REV' reminder. Since the K3 remembers the sideband last programmed for a band I wish that there was a simple SSB mode change command which could be used in macros rather than a specific USB or LSB command.... or does this command already exist already? I believe that when I wrote the macros a few years ago I confirmed that such a command it wasn't available.
Thanks for a great radio. Next thing to do, after the dust settles, is to upgrade the sync boards used for the main and sub receivers. 73, Rich - K1HTV = = = Rich, Thanks for re-posting this info. Note that some of the commands embedded in your macros may not be needed since they are already remembered on a per-mode basis. For example, once you've selected CW REV on a given band, it will always be CW REV until you change it. There are other cases as well, left as an exercise for the the reader :) 73, Wayne N6KR On Mar 3, 2015, at 8:30 AM, Rich - K1HTV <[email protected]> wrote: > Seeing the request for self modifying macros, I thought I'd re-post these > how-to documents that I posted on this reflector a number of years ago. > Hopefully they will help you understand how to create your own macros which > can be used to rotate between a series of parameter changes via a single PF1 > or PF2 key press. Have fun playing with them, without as many headaches that > I had in learning how to get them to work. > > 73, > Rich - K1HTV > > For those of you who want to play more with macros, here are four that I use > to set up my K3 for USB, CW, DATA-A and RTTY. Parameters that are set up > include mode, receiver bandwidth, audio input connector (Front Panel for > microphone, rear Line-In jack for DATA-A modes), Mic Gain and Compression > level for SSB, CW Speed, VFO lock for DATA-A modes like PSK31, JT65 and WSPR. > You can add or change other parameters in the macros for the various modes as > you see fit. ..... balance deleted ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
