Hi Chuck:
You should download the latest version of the KX3 utility (for your
computer's OS)... and then when you connect the rig's USB or RS-232
cable and launch the utility, you can then retrieve the latest
production release of firmware for the KX3. However, if you have not
yet done so, you should make a copy of your -particular- rig's
settings. Elecraft recommends doing that the very first time you
launch the utility. I presume you have already done that with your KX3.
Don't forget that there a several new features that must be enabled
via the rig's menu, and that you need to power cycle the rig after
updates, to have the new firmware take effect.
I'm a QRP guy, so I don't have any hints regarding using an external
amp. :) I'm sure others will respond.
73 de Ray
K2ULR
KX3 #211
On Mar 7, 2015, at 12:24 PM, W4MIL via Elecraft wrote:
I've not been active in some time with my KX-3. Last firmware
update was MCU 1.61 and DSP 1.23.
What are the latest (non-Beta) releases available? Also, does
anyone have recommendations on a good desk mic for the KX-3? And
any recommendations for an interface to allow keying of an SB-200
amplifier?
I've tried to keep up with all of the comments over the past 1.5
years, but things change as the KX-3 has evolved and individual
experiences may differ today from those in the past.
Thanks in advance for any info.
73 Chuck W4MIL
チャーリー ミルトン
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
