There is no harm in leaving TECH MD set to ON, but there is exposure for
those "playing in the menu" to undo the calibration settings that fall
under the requirement to have tech mode turned on. So when used at the
home station, fumble fingers is the major exposure.
Now -- for Field Day and other occasions where others operating your K3
might try changing settings 'just to see what happens', you may want to
turn TECH MD off during that event.
73,
Don W3FPR
On 3/7/2015 5:56 PM, Roger D Johnson wrote:
I think it's for Field Day or contests where someone else may be
operating the rig. It keeps
some of the more critical items a bit better hidden.
73, Roger
On 3/7/2015 5:36 PM, Ken G Kopp wrote:
I've wondered why there's an "OFF" mode for TECH MODE. Mine's never
been off since I first turned it on. There's likely a reason, but
I'm not
aware
of it.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
