Jim,
I wouldn't worry about it. Just push the tune button on the radio
and let the KX3 sort it out and remember. I do so many antenna things
around here and never depend on the memories. In fact I have a real
problem going from 28.3 MHz. to 28.6 Mhz. but the radio keeps up with
it. It takes just a moment for it to catch up, but it does.
73,
Barry
K3NDM
On 3/8/2015 1:42 PM, James Bennett wrote:
Have a question about the KX3 utility. I recently upgraded my antenna system
feedline, going from 450 ohm line to 600. Afterwards, I cleared the KX3
internal tuner’s memories and then re-trained it on every band at the proper
segments.
Now I want to use the KX3 in a portable operation with a different antenna for
a while. Are my memorized antenna settings saved with the configuration? If so,
I can back up the config, go do my portable operating with a different antenna,
and then come back home and restore the configuration. Yes…..??????
Thanks, Jim / W6JHB
Folsom, CA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
