I had a quick look at the programmer's reference, and saw some commands: IC will read the status of the OFS LED MP can be used to set the VFO OFS menu setting (maybe setting to off and back to on will put the OFS LED in a known state?) SWT can be used to tap the OFS knob, which will toggle the LED
Maybe if you have a play with these commands you'll find out what is possible. 73, Matt VK2RQ > On 11 Mar 2015, at 6:37 am, geoff allsup <[email protected]> wrote: > > Been playing with macros a bit and am wondering if there is a command > available to set the Offset/VFO B control to VFO B? Haven't spotted something > like that in the programmer's reference. > > geoff - W1OH > > -- > ******************************************************************* > Geoff Allsup, W1OH [email protected] or [email protected] > Senior Engineer Upper Ocean Processes Group > Woods Hole Oceanographic Institution Woods Hole, MA, USA > ******************************************************************* > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
