This could be a bug. Are you using new synths? Diversity mode? Wayne N6KR
On Mar 12, 2015, at 9:25 AM, Chuck Teague via Elecraft <[email protected]> wrote: > My first post on this didn't make it to the list due to clerical error on my > part, so here is attempt two. > The sub-receiver in my K3 is equipped with a 2.7 5 pole filter in position 1, > and a 400Hz 8 pole in position 5. All works well until I narrow the > bandwidth to 400 Hz, then the sub-receiver goes quiet (the main continues to > work normally.) I used the K3 utility to set filter 5 bandwidth both > narrower and wider, and wherever it is configured is where the receiver goes > quiet. > I can't find anything in the archives about this particular problem, but > thought I would seek the group collective wisdom before tearing into the > radio. Thanks, > Chuck Teague, NN7U > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
