That is what support just told me too. Sounds like a bad batch of encoders to me.
I may change them out when I get my new synthesizers. Mike W0MU On 3/12/2015 9:45 PM, Alan Sewell wrote:
I had the same problem with my CMP / PWR encoder for several years. I finally replaced all four of the push button encoders last November. I wrote up what I did at <http://www.n5na.net/s9y/>. 73, Alan N5NA Date: Thu, 12 Mar 2015 12:34:43 -0700 From: Dennis W0JX via Elecraft <[email protected]> To: [email protected] Subject: Re: [Elecraft] Sluggish Encoders Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii My K3 also has been having trouble with sluggish encoders. The worst one is keyer speed. Sometimes (not always) turning the speed control doesn't change the speed. The power control takes FOREVER to move from 100 watts down to 50 or less. My shift control is jumpy at times but width seems to be OK. Since the speed and shift controls are not always problematic, I suspect a software conflict. 73, Dennis K3 #3481 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
