Thanks Peter.
I do see the 90 degree phase difference and how it changes if I move
above or below the test frequency. However the amplitude of just one,
the ring conductor on the connector, decreases with increasing delta
frequency. The amplitude of the tip remains steady regardless of the
delta frequency.
I assume this isn't what I should be seeing. Now I need to figure out
me next move as this seems to not be what the PX3 wants.
Does anyone know a reason the I and Q might be different amplitudes for
the same signal?
Thanks.
John, kx4o
On 3/16/2015 8:38 PM, Peter Lambert wrote:
Hi John,
In this situation the amplitude of both the I and Q channels should be the
same and they should always be 90 degrees out of phase.
Peter VK4JD
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
