Jerry,
Does the K3 respond normally when operated from the buttons and knobs?
If so, the problem lies with the software that you are using - in this
case, N1MM - unless there is a bug in the K3 command structure, and
AFAIK there have been no recent changes.
73,
Don W3FPR
On 3/20/2015 9:00 PM, Jerry Knowlton wrote:
Evening all,
I was setting up N1MM with the K3 for the Virginia QSO party tomorrow when I
noticed the following strange behavior.
Whenever I press any of the FKeys on N1mm (with the exception of F4 and
F12), the mic gain on the K3 gets set to 1. I cannot remember this was
always this way or something has changed in either N1MM or the newer K3
configuration files.
So a couple of questions before I jump over to N1MM with a bug report; has
anyone else experience this problem? Any suggestions to check on the K3?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
