Yes he gave the official answer. I figured that was the case, but admittedly
this is the first time for me with a Solid State Amp so I wanted to ensure I
was reading it right.
What a nice chance from Tubes, and with the KAT500 it's like having a 500 watt
radio.
I could learn to like this :)
From: Don Wilhelm <[email protected]>
To: Harry Yingst <[email protected]>; KD7PY <[email protected]>;
"[email protected]" <[email protected]>
Sent: Sunday, March 22, 2015 6:45 PM
Subject: Re: [Elecraft] KPA500 Proper Transformer Tap setting
Harry,
You did get the "official" answer from Jack Brindle. He did some of the
design of the KPA500.
Yes, keyup - less than 85 volts. Keydown, greater than 60 volts.
73,
Don W3FPR
On 3/22/2015 5:23 PM, Harry Yingst via Elecraft wrote:
> Your voltages are about the same as I'm seeing here
> I would tend to believe that it should be under 85v key up and over 60 Key
> down.
> Hopefully we can get the "Official" answer
>
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
