Is it possible to bypass the ATU on one antenna but not the other? I have a small transmitting loop on ANT1 and a horizontal wire loop on ANT2. The STL has an ATU for tuning the loop physically, and thus I should not be using the ATU on the KXPA100/KX3. I'd like to disable/bypass the ATU for this antenna, but the ATU is necessary for the horizontal wire loop, so I would like to have it enabled on the other antenna.
Currently I have to be careful when switching antennas not to short-press the button as it will tune on the STL if I do, which is non-ideal. I also have to clear all tuning every time I turn on my radio to make sure I haven't fat-fingered and tuned up the wrong antenna. Having the ATU setting by antenna specific would make this significantly easier. If this isn't currently possible, I submit it as a feature request. Thanks, David ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
