Hi Rick, I would like to comment on the mystery cycling between 14000 and 14050. I have experienced this behavior. Do you have more than one SteppIR controller? Are they slaved together and is the master controller the older style and the slave controller(s) the SDA100 style?
If yes, then the problem may be caused by the fact that the old controller resolves frequency to 10Hz and the SDA100 resolves to 1Hz. Logging programs tend to request frequency information every second or so. The SDA100 display will immediately display the exact frequency. But a second later it will correct itself to the 10Hz resolution of the master controller. 73, Mike K2MK Rick Tavan N6XI wrote > Thanks, Don. That's what I thought. > > Cycling AUTOINF Off, then On got it working again. But after that it kept > cycling between 14.000 and 14.050 as if the K3 were sending bogus IF; > messages. It did this several times during most minutes until I power > cycled the radio. So now I have seen two styles of AUTOINF misbehavior, > not readily reproducible. I'm off to the other QTH now for a few days and > won't be able to work on it but will try to characterize it better when I > get back. > > Meanwhile, if others have seen errant AUTOINF operation, please let me > know. > > Thanks, > > Rick -- View this message in context: http://elecraft.365791.n2.nabble.com/AUTOINF-Auto-1-Anomaly-tp7600692p7600712.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
