Seems like you may have a bad connection between the RF board and the tuner, or between the tuner and the BNC connector. I'd investigate that first. If no luck, try removing the tuner altogether and see what happens into a dummy load. If you contact Ekecraft support, they can help you isolate the problem and propose a solution.
73, Matt VK2RQ > On 28 Mar 2015, at 5:25 am, George via Elecraft <[email protected]> > wrote: > > No longer matches any antenna. I press ATU tune and hear relays working. > While relays click I see 3 watts on led and swr stays at 25.4. Does not > matter what antenna I use. If I bypass tuner and connect a dummy load it > shows > 25.4 to 1 swr also. Planning a trip soon so need it working. Thanks 72 > George/W2BPI > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
