Hi, all. I recently uncovered a bad solder on C41 that had been there from my initial build some years ago. Now I get 4.1w on 40m and 2.7w on 20m--both much higher than I've ever seen. I'd like to get more power out on 20m even if it takes away from 40m. L2 is wound pretty tight so there isn't much movement in spreading the windings. In searching the mail list for ideas, it does seem as if 20m should be closer to 40m. Should I rewind L2 loosely so it is easier to move around? Or leave it alone? And, yes, I've checked the number of turns on L1 and L2 as well as the capacitor values multiple times. These measurements are with the ATU out of the circuit.
Thanks, Clark/WU4B -- View this message in context: http://elecraft.365791.n2.nabble.com/KX1-20m-Power-Out-Question-tp7600797.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
