Hi Dan and others, For a brief explanation how the KAT500 and KXAT100 tuners operate have a look at http://www.ke7x.com/home/kat500-and-kxpa100-tuners
Cheers, Fred KE7X Author of: "The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 - Going for the summit" "The Elecraft KPA500 and KAT500 - the K-Line Dream Station" Printed, coil bound copies of these are all available at www.elecraft.com KPA500 and KAT500 Quick Set Up Guide http://www.ke7x.com/home/k-line-introduction-and-set-up-guide KAT500 and KXPA500 Tuner Operation http://www.ke7x.com/home/kat500-and-kxpa100-tuners -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Dan Baker Sent: Friday, April 03, 2015 9:34 PM To: Fred C. Jensen Cc: [email protected] Subject: Re: [Elecraft] Elecraft] KAT500 Feature Request Only on 160 does it hunt when placed in the manual mode. I am not sure why since I am using a 160 loop. Dan On Fri, Apr 3, 2015 at 8:04 PM, Fred C. Jensen <[email protected]> wrote: > Sometime back, a FW update has the Tuner following as you tune. You > don't have to tx. Put tuner into manual after training. > > 73, > > Fred K6DGW > TDY Sparks NV > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
