After a long pause I started to operate in PACTOR again. My K3 behaves differently today compared to earlier firmware some years ago. Current FW is MCU 05.14, FPF 01.19, DSP 02.83.
In DATA A mode: (1) PITCH shows N/A, in contradiction to the user manual. Seems to be fixed at 1500 Hz. That's fine with me, as I can adjust the mark/space tones in my PACTOR modem accordingly. (2) SHIFT/WIDTH controls are showing a strange behaviour: Based on the green LEDs next to the 2 controls, only LO/HI CUT is available, SHIFT/WIDTH is not. When moving LO/HI cut, filter graphic and VFO B display are both indicating a LO/HI cut, but what effectively happens is a width variation. Verification is easy: Acoustically or on the P3 display. 73, Markus HB9BRJ -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-SHIFT-WIDTH-in-DATA-A-mode-tp7601016.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
