Paul,
There should not be any damage with that cable connected the wrong way -
but the connector with two cables needs to connect to the K2 if the
RS-232 communications is to work.
73,
Don W3FPR
On 4/29/2015 12:31 PM, Poul Erik Karlshøj (PKA) wrote:
PROBLEM SOLVED
Hi Don,
It was (of course) finger-trouble.
I had installed the cable the wrong way. The connectors to the K2 and KAT were
interchanged - happily there seems not to be any damage.
Need to mark-up these cables!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
