I’ll give the MFJ product a try. Hopefully the quality will be OK - one never knows what you’ll get with their stuff! But if this works I’ll be a happy camper.
Thanks Gus 73, Jim / W6JHB > On Thursday, May 7, 2015, at Thursday, 8:04 AM, Augie Gus Hansen > <[email protected]> wrote: > > > On 5/6/2015 10:23 PM, James Bennett wrote: >> ... >> >> I diagrammed it on paper and came up with another idea. What “should” work >> is to have a coax switch that completely takes the FEP out of the circuit, >> basically a “ganged” coax switch, for lack of a better term. When set to one >> position, the FEP is in the circuit between the vertical and ANT2, and when >> in the other position, the vertical would be connected directly to ANT2. >> This action could be done with two individual switches, but would make >> things easier if I could locate an SO-239-based coax switch that switches >> two ports at the same time. Anyone know if such a device exists, and it so, >> where it might be sold? > > MFJ-1705H RF Bypass Switch. > > I use one to bypass an Icom IC-PW1 (original), which doesn't have a pass-thru > feature when powered off. > > > Gus Hansen > KB0YH > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
