Have you double checked that the W2 is on the 200 or 2000 watt scale as
opposed to 20 watts?
Mike
KI0HA
On 5/22/2015 6:42 PM, Brian Denley wrote:
Don et al:
I am doing the final test on a KPA100 kit that I have assembled. Every test
has been nominal but my W2 peaks out at 20 watts. I do get 5 watts when set at
5, etc. but for any setting above 20, I just get 20 watts out. If I go into
tune mode for 10 sec or so, the KPA100 transistors do get hot. Every
resistance test, etc. has been perfect, my bias is set at .97 amps. T-R is set
to 8R- HOLD.
Any ideas would be appreciated.
Brian
KB1VBF
Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
