Craig, I personally see no advantage in completing only half the board - there are just not that many parts involved. If you have an older K2 without the transverter holes in the lower rear panel, I would consider not mounting the RCA jacks if no transverter operation were contemplated, but I would wire and install the entire K60XV option.
73, Don W3FPR > -----Original Message----- > > I'm about to build the XV60 60m / transverter adaptor for my K2. At the > moment, and for the forseeable future, I have no use for the transverter > capability; I just want to try operating the 60m band. Is it possible to > populate just the part of the board that pertains to the 60m > capability and > then make only the modifications to the K2 boards that have to do with 60m > and leave out the transverter capability? Looking briefly at the XV60 > manual it looks like most of the complexity in installing the > board into the > K2 involves the transverter portion. > > Any comments would be appreciated. > > 73, > Craig K3OOL > K2/100 #4790 > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
