You need to set PREAMP2 to on by holding down MENU/CONFIG. Then press the PRE button and it will rotate from OFF to PRE 1, then to PRE 2.
This needs to be done 3 times, if you desire, for 6, 10 and 12 meters. 73 de Sebastian, W4AS > On Jun 6, 2015, at 6:35 PM, Dick Hanson <[email protected]> wrote: > > First of all, thanks to all for responding! > > > > The good news, fwiw, is that I was able to toggle to the B configuration by > following Bob's suggestion of going to the KXV3 menu and then pressing 9. > > It switched to the new configuration and no more err. > > > > When I press PRE, it now briefly displays PRE 1, which is new to my radio. > > Have not yet been successful bringing up pre 2. > > > > And of course, after plugging my trusty serial to usb cable..it seems to > have quit, at a very inopportune time. > > Been that kind of day, but, I'll find another cable and go for 5.26. > > > > Thanks again. > > > > 73 > > Dick, K5AND ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
