Hi Mike, Check the CONFIG:LIN OUT value. It should be about 10 or so. When you are in that menu tap the 1 key to make sure it isn’t =Phones. Good luck. 73, Fred KE7X
Author of: "The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 – Going for the summit" “The Elecraft KPA500 and KAT500 – the K-Line Dream Station” Printed, coil bound copies of these are all available at www.elecraft.com KPA500 and KAT500 Quick Set Up Guide http://www.ke7x.com/home/k-line-introduction-and-set-up-guide KAT500 and KXPA500 Tuner Operation http://www.ke7x.com/home/kat500-and-kxpa100-tuners and brand new “The Elecraft KXPA100, PX3 and 2M/4M Transverters – Assembling the KX3-Line Station” available at www.lulu.com. -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Michael Aust Sent: Saturday, June 06, 2015 11:34 PM To: [email protected] Subject: [Elecraft] K3 Line-Out help needed Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3. Do I need to turn something on in the K3 Menu ?? If I plug into front Headphone Jack on K3, it works. I need a independent Audio Line-Out that is nottied to the front panel volume control. Thanks in advance. SN# >8000 Firmware 5.14 Mike ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
