Hello, I have a question about the sub receiver I installed this weekend.
The procedure for the aux antenna states you have two options for an AUX antenna, either put the BNC in the back of the radio OR connect though the KAT3 so the non used antenna port is the AUX. >From reading the book, I presumed this is an optional step. In other words, I >can do the BNC jack, connect the KRX3 to the KAT3 or NEITHER. I choose neither. I hope I got that right. My question is that when I tell the radio that I am using the KRX3, I select from Not Installed, AUX-BNC or AUX-KAT (paraphrasing). Well, since I did not do either of what I consider optional steps, neither one of those makes sense to select. I selected the KAT option but if the steps are really optional, I would thing the CONFIG options should be ON-NoAUX, AUX-BNC or AUX-KAT. Can someone clarify if the AUX steps are indeed optional and if so, which KRX3 option should I select in CONFIG. Thanks, Tom NY4I Tom Schaefer 727-437-2771 P.S. Drowning in email? I use SaneBox to instantly clean up my Inbox: http://sanebox.com/t/gdaz7 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
