Dave, I remember that encoder tunning noise as same as birdies has been discussed long time ago already.
First of all regarding the birdies (if it is Your case also) check if all screws inside the radio (modules which you had to remove for the new synths installation) as same as the covers etc. are tightened enough. It was not my case, but I remember that lot of folks reported that after checking that mni birdies disappeared. (grounding, shielding etc.) Also You can try to set SIG RMV function in CONFIG menu. See page 59 of the manual... Regarding the tunning noise (if I remember well but I am not sure) there was some additional item in the menu to reduce this encoder noise so You can check if it is ON and if it will help... Sorry if it is not so helpful. 73 - Petr, OK1RP K3 #778 -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-VFO-Tuning-Noise-tp7603999p7604015.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
